Get a Quote

Aluminum Candy Tins Wholesale

DOLYPACK supplies aluminum candy tins for confectionery, gourmet, and gift packaging. Each aluminum candy tin is matched to the candy type, shape, lid, and finish, with a sample confirmed before a bulk order.

Request a Quote
Get Free Samples
rectangular aluminum tin with rose gold interior and green lid
rectangular aluminum tin with rose gold interior and green lid

Candy Tin Shapes & Formats

Aluminum candy tins are produced in round, square, and rectangular bodies, plus window formats with a clear or cut-out lid panel that shows the candy without opening the pack. Shape affects embossing depth: flat panels on square and rectangular bodies hold finer detail than curved round bodies with seamed corners, so a logo that needs sharp definition usually favors a flat-sided tin.

Lid & Closure Options


Match the closure to how the candy is filled and opened, not just how it looks on the shelf:

  1. Screw lids suit gift tins meant to be reused and reopened repeatedly.

  2. Slip lids give fast, one-hand access for favors and counter displays.

  3. Click lids snap into place and hold a tighter seal than a slip lid without a twist motion.

  4. Window lids improve visibility for hard candy and gummies, but offer less protection for sticky candy that could adhere to a loose-fitting lid.


Hard candy and mints tolerate a looser lid, while soft or slightly tacky confections need a tighter click or screw seal. Full sizing and gasket details for screw-thread formats are covered in the screw-top tin closure guide.

Sizes & Capacities

ShapeDiameter / HeightCapacity (ml)Lid TypeMin Order per SKU
RoundConfirmed per mold5 ml – 6,000 mlSlip, click, screw, windowConfirmed per SKU
SquareConfirmed per mold5 ml – 6,000 mlScrew, click, windowConfirmed per SKU
RectangularConfirmed per mold5 ml – 6,000 mlSlip, hinged, windowConfirmed per SKU
Flat (low-profile)Confirmed per mold60 ml / 130 mlSlip, clickConfirmed per SKU

For candy, that range narrows in practice:

  • 60 ml: A low-profile option for pocket mints and a small handful of wrapped pieces.
  • 130 ml: Fits a small multi-piece gift assortment or a larger hard-candy serving.
  • Larger formats: Suit gift sets, layered chocolates, and larger favor packs within the catalog’s 6,000 ml ceiling.

Bring your piece count and target fill weight to the inquiry so we can match an existing body or scope a mold.

Aluminum vs. Tinplate

Aluminum and tinplate suit different packaging priorities:

Aluminum

Lighter, smoother, and well suited to embossed logos, anodized color, and premium retail presentation.

VS

Tinplate

Typically more cost-effective at larger sizes and more resistant to dents in rough transit.

Choose aluminum when brand presentation and weight matter more than raw rigidity. For a steel-tin candy line, tinplate candy tin options cover hinged, latch, and handle formats built for that material.

Rose gold aluminum tin with perforated lid by DOLYPACK

Custom Decoration & Finishes

Aluminum candy tins support several decoration and finish options:

  • Embossing and debossing: Add raised or recessed branding after depth and placement are checked against your artwork.
  • Printing and labeling: Apply artwork to an existing body or a custom shape.
  • Surface finishes: Choose matte, glossy, frosted, metallic, or anodized finishes according to the body and process.

Anodizing is aluminum-specific: it produces consistent color without the added lacquer layer a steel tin needs, and pairs well with an embossed logo for a mint-tin or gift-tin look. Final depth and placement are confirmed once a mold or existing tin is selected.

Food-Contact & Packaging Considerations

Tell us whether the candy sits directly against the metal or inside an inner bag, cup, or tray.

Direct contact affects the internal coating, lacquer, or liner required. It also affects window-lid material choices when a clear panel forms part of the seal.

Confirm food-contact requirements for your destination market with our team before sampling. Treat this as a review step, not an assumption based on the tin alone.

Two round candy tins, one open revealing colorful candies inside, and the other closed

Sourcing Process — Tooling, Samples & MOQ

DOLYPACK’s in-house tooling team supports both stock and fully custom candy tins:

  • 01Choose the tooling path

    Use existing tooling when a stock shape fits the brief, or develop a custom mold or die for a new shape.

  • 02Review the impact

    Existing tooling generally keeps minimum quantities and lead times lower. Custom tooling adds development time before production and may raise both the minimum and the schedule.

  • 03Confirm the run

    Exact minimums and timing are set after the shape, decoration method, and order quantity are confirmed. With 10+ years in metal packaging and 441+ references supplied to more than 80 countries, the process moves from sample approval to production once specifications are locked.

FAQ

Which is better, tin or aluminum?
Aluminum is lighter and takes a smoother, more premium finish, including anodized color, while tinplate/steel is usually lower-cost and more dent-resistant for larger tins. See the tin vs. aluminum comparison for the full material trade-off.
Request a Sample, Send Artwork, Get a Quote

Send your candy type, target fill weight, preferred shape, and lid choice, and we’ll confirm the shape and closure before decoration begins. Upload vector artwork (AI, EPS, or vector PDF) for embossing or print-placement review; bold shapes reproduce more reliably than fine detail.

The same tooling and finish options extend to tea and coffee tin packaging and pocket-format lip balm tin formats if your line spans multiple categories.

Request a Quote or Free Sample — quote turnaround follows the same review as MOQ and lead time, confirmed once your container, decoration, and quantity are set.

Request a Quote
Get Free Samples